Stox – Smart Ozone Sensor Device

-
+

What is the Stox – Smart Ozone Sensor Device?

The Stox Smart Ozone Sensor Device is an intelligent Gas Sensor Device with a 4-20mA two-wire and RS485 Modbus RTU output signal. It uses an intelligent microprocessor with high-reliability solid polymer electrochemical gas sensor technology and intelligent algorithm calculation.
The Stox Device is a smart solution for industrial safety applications, combining temperature and humidity in one sensing device. The intelligent Gas Sensor Device provides a self-test, which evaluates the sensor performance without a gas measurement. Therefore, it is the excellent solution for smart home and IoT applications. The data is put out through the the output signal or RS485 transmission command, which makes it easy and convenient to identify the right time to perform maintenance and replacement. Each Stox Sensor Device has been professionally calibrated with the gas. It can be instantly used without prior warm-up time and the calibration information is stored in the flash chip. There is a calibration software from EC Sense in case a recalibration should be performed with the RS485 output or the 4-20mA output signal should be corrected. The Stox Gas Sensor Device has a standard 4-20mA two-wire or RS485 Modbus RTU output signal that allows for quick device and system setup or connection to a display, DCS, PLC and other systems

What Sensor Technology is used?

The heart of each Sensor Module is a solid polymer electrochemical sensor. This technology is a revolutionary innovation in the field of electrochemical detection. In essence this technology is based on the principle of electrochemical catalytic reaction. As a general rule the target gas generates a sensor signal which is direct proportional to the gas concentration. This is a basic electrochemical reaction. In addition to that the EC Sense solid polymer sensors are small, robust, reliable and above all do not consume any power.

FEATURES

  • Detects single gas + temperature + humidity
  • With calibration, sensor performance and life-testing output
  • Fast response time and stable zero return time without drift
  • Long lifetime
  • Anti-poisoning
  • anti-electromagnetic interference ability
  • Suitable for indoor and outdoor environments, sensor can work in -40℃ to +55℃
  • Electronic circuit boards have a dust and corrosion resistant coating
  • Integrated safety protection enables use in potentially explosive environments
  • Fast signal stability time at power on
  • 4-20 mA standard two-wire & RS485 Modbus-RTU output
  • 24V DC power supply
  • Small size
  • RoHS approved environmental design

SPECIFICATIONS

Technical Parameters

  • Measurement Range: See Datasheet
  • Resolution: See Datasheet
  • Response Time: See Datasheet
  • Output: 4-20 mA two-wire, RS485 Modbus-RTU
  • Working Voltage: 12 to 24V DC
  • Operating Temperature: -40 °C to +55 °C
  • Operating Humidity: 15 to 95% RH. Non-condensing
  • Weight: 135 g
  • Dimensions: 185 x 150 x 108 mm

Warranty

APPLICATIONS

SOFTWARE

ACCESSORIES

Shopping cart0
There are no products in the cart!
Continue shopping
0